Posted by If you’ve got rust spots on your stainless steel cooking appliances, you may wonder how to remove them. The good news is that there are several ways to do this. One of the easiest ways is to apply a baking soda paste to the rust spots. Simply apply the paste with a soft cloth, rubbing it gently in the direction of the grain. Samsung recommends using one tablespoon of baking soda to two cups of water, while Kenmore suggests a mixture of equal parts baking soda and water. If you’re unsure of how to apply this paste, consult your appliance’s manual, as manufacturers often provide specific advice.
Contents
Baking soda
If you have a rusted pan or a stain on your stainless steelware, you can use baking soda to remove these stains. It is a natural abrasive that is mild on metallic surfaces. You can simply mix baking soda and water and apply it to the stain. After about an hour or so, scrub it away using a soft bristle brush. You can even use an old toothbrush as a scrubber. Repeat the procedure until the stain has disappeared.
A paste made from baking soda and lemon juice is a great home remedy for removing small rust spots. You can apply this paste to rust spots, then wipe them off with a damp sponge. The paste needs to be applied twice and left on the stain for about 30 minutes to work. Using lime juice instead of lemon juice works well, too. This solution will dissolve any remaining rust and food stains on the surface.
Phosphoric acid
Phosphoric acid is a colorless liquid with a syrup-like consistency. It is used in various industries as a dust control agent, including agriculture and chemical manufacturing. It is also used in dentistry. Factory rust control agents typically contain this acid, which is a type of primer for metal. To remove rust from stainless steel, mix the acid with a small amount of baking soda. Allow the resulting solution to stand for at least 30 minutes before rinsing.
If the rust is stubborn and cannot be removed with a simple cleaning solution, you can use phosphoric acid to dissolve it. To prevent watermarks and streaks, rinsing the stain with clean water afterward is an excellent choice. Phosphoric acid is highly toxic if inhaled, so you should always follow safety precautions after using it on stainless steel.
Oxalic acid
If you have a stain or rust on your stainless steel sink, faucet, or other metal surfaces, oxalic acid can help you remove the stains without damaging the metal beneath. It can be applied to the affected area by swabbing it on with a cotton swab and left to sit for about 15 to 20 minutes. Rinse the affected area with water to remove any remaining residue. Be sure to follow the instructions on the bottle.
For stubborn stains, you can try applying a liquid cleaning solution containing oxalic acid. You can purchase this solution in the market and use it on a stainless steel surface. You must wear safety gear to avoid any skin irritation. After applying the cleaning solution, you should use a soft rag or sponge to wipe the affected area. You can also apply a paste made from baking soda and lemon or lime juice to remove the stain. Make sure to scrub the rusted area in the direction of the grain.
Avoiding rust removers
To avoid the damage that rust removal agents can cause, you should use a non-corrosive cleaning agent on the stained surface. Some home improvement stores carry oxalic acid rust remover. Other brands use a non-corrosive cleaning solution made of a liquid with no grit. For a high-quality clean, buy a quality rust remover, such as Kleen King Stainless Steel and Copper Cleaner. Never use caustic cleaners with chlorides, as these can damage the protective layer of the steel.
One type of rust remover that is safe is oxalic acid, which can be found in dish soaps and other natural cleaning products. Potatoes contain oxalic acid, so you can scrub your rusted surface with a few slices of potato. If you do not have these products, you can use salt instead. It will work well for light rust on stainless steel.
Dissolving rust spots on stainless steel
If your stainless steel pan has a rust stain or spot, you can remove it easily by rubbing the area with a paste of baking soda and water. Ideally, you should use distilled water instead of tap water. Rub the spot in the direction of the grain. After a half-hour, rinse the stain with water or a rag. For larger stains, use a stainless steel cleaner that contains oxalic acid. You can also mix a paste of baking soda and lemon or lime juice to remove rust from stainless steel.
The first step to removing rust is to rub the stain with a soft cloth. Rub in a circular motion, following the grain of the stainless steel. Rinse thoroughly and dry thoroughly. If the stain persists, use a commercial product. If you do not have a steel cleaner at home, you can buy one at a local hardware store. You can also try boiling water as a stain remover.