Posted by Here are some steps that you should follow to clean your water cooler. You should know that vinegar is an excellent choice for cleaning water coolers. You can dilute the vinegar with lemon juice if you prefer. To use vinegar to clean your water cooler, you need to add three parts water to one part white vinegar. To clean the cooler properly, unplug the water cooler before cleaning it. To avoid the possibility of water coming into contact with live electricity, make sure that you unplug it before cleaning it.
Contents
Cleaning a bottled water cooler
Before using a bottled water cooler, be sure to clean it thoroughly. It should contain a plastic bottle hood to prevent sunlight from tainting the water. You should also purchase a sanitation kit, which will contain cleaning materials and instructions. To avoid damage to your cooler, keep it out of direct sunlight. Once you’ve cleaned it, you’re ready to refill it with clean water. To clean the outside of the cooler, follow these steps.
While most water coolers are clean and disinfected when they’re new, they can quickly build up a buildup of dirt, debris, and bacteria. Regular cleaning can ensure fresher water, as well as better taste and smell. Most water companies recommend cleaning their water coolers every six months, so be sure to do so regularly. The water cooler should also be cleaned at least every three months. Cleanout time can also depend on the model of your cooler.
Cleaning a bottom-loading water cooler
The first step in cleaning a bottom-loading water cooler is to drain the entire contents of the reservoir. This can be done by draining the water from the cooler into a basin or down the toilet. Next, you should pour 1 part vinegar to 3 parts water into a plastic bucket and shake it to remove all the residue and dirt. This solution should be left in the cooler for 30 minutes. Now, you can replace the water bottle and re-plug it into the electrical outlet.
To clean a bottom-loading water cooler, first, make sure that the water is not too hot. The hot water must fit in the center hole. To clean the dispenser, you can use liquid chlorine bleach and water. Before cleaning the unit, you must unplug the power cord from the cooler. Be sure to follow the instructions on the box carefully. Clean the bottom-loading water cooler according to manufacturers’ instructions.
Cleaning a top-loading water cooler
First of all, you’ll need to remove the water guard and baffle from the water cooler. To clean it, use a non-abrasive sponge with mild dish detergent. Rinse well and allow the water to dry. Alternatively, you can pour a vinegar-water solution into the reservoir and scrub with a microfiber cloth. After rinsing, replace the water bottle and plug the cooler into an electrical outlet.
If the top-loading water cooler has a large reservoir, you can make a solution of 1 cup of distilled white vinegar and three cups of hot water. Use a 1:3 ratio if you wish. Afterward, use a long-handled scrub brush to clean the inside of the reservoir. Allow the solution to sit for a few minutes before using it to rinse it out. The vinegar-water solution will remove any bacteria or biofilm that may be present.
Cleaning a hot water cooler
Before cleaning a hot water cooler, it is important to remove the baffle and water guard. You can also use a sponge to clean these parts. You can also use a cleaning solution containing 1 part of vinegar to 3 parts of water. After cleaning, drain the cleaning solution into a bucket and flush it down the toilet. Repeat this process as needed. When done, let the cooler dry completely. To keep it from rusting, apply a lint-free cloth or sponge to the baffle and interior.
Disconnect the water cooler. Drain the water from the reservoir, draining it into a basin or flushing it down the toilet. Next, mix a solution of vinegar and water with a 1:3 ratio. You can also use a funnel to pour liquids into the water cooler. Then, shake it and then insert the water cooler back into its basin. Don’t forget to remove the drip tray and rinse it with clean tap water.